Havre's trusted spray foam contractor for commercial roofing, residential insulation, and emergency roof repair across Montana.
From SPF roof installation to attic insulation, Lapolla Industries covers every spray foam need in Havre.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.
Roof leaks get worse with every rain. Our crews respond fast, identify the exact source using infrared and moisture mapping, and apply permanent repairs using spray foam and coating systems designed for long-term performance.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
Stop chasing flat roof leaks with temporary fixes. Our diagnostic approach pinpoints the exact failure point, and our repair methods address the root cause — whether it is failed flashing, membrane damage, or ponding water that needs re-sloping.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Closed-cell and open-cell spray foam attic insulation that eliminates air infiltration and creates a continuous thermal barrier from ridge to eave. Most projects completed in a single day with immediate comfort improvement.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
Seamless waterproofing membranes applied over existing roof surfaces to eliminate leaks and ponding water permanently. Our spray-applied systems conform to every detail and create a monolithic barrier with no seams to fail.
Complete roof restoration with spray foam and protective coatings that add 20 or more years of life to your existing roof — without the cost, waste, and disruption of a full tear-off and replacement.
Preventive roof maintenance programs with scheduled inspections, drain cleaning, minor repairs, and detailed photo-documented condition reports. Catch small problems before they become expensive emergencies.
When severe weather damages your roof, our storm response crews deploy fast — securing your property, documenting every impact point for your insurance claim, and restoring your roof with quality materials and expert workmanship.
Energy costs hit smaller communities like Havre, MT just as hard as big cities — sometimes harder. Lapolla Industries specializes in spray polyurethane foam solutions that deliver R-6.5 per inch of insulation value, the highest of any roofing or insulation material available. For Havre property owners, that translates to immediate, measurable savings on heating and cooling.
Our spray foam systems create a seamless thermal envelope that eliminates air infiltration — the single biggest source of energy waste in buildings. Whether we are insulating your Havre attic, sealing your crawl space, or installing a new SPF roof, the science is the same: eliminate gaps, stop air movement, and let your HVAC system work the way it was designed to.
We are committed to delivering exceptional spray foam solutions that protect your biggest investment.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
SPF roofing and coating can be applied over existing roof systems without tear-off — no demolition noise, no debris, and no business interruption during installation.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Answers to the most frequently asked spray foam questions from Havre property owners.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Havre we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Yes. Every Havre crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Spray foam insulation costs in Havre typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Havre homeowners see a full return on investment through energy savings within 3 to 5 years.
In most cases, yes. One of the biggest advantages of SPF roofing is that it can be applied directly over existing roof membranes — TPO, EPDM, built-up, and even metal — without a costly tear-off. Our Havre crews evaluate the existing substrate to ensure it is structurally sound before application.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in Havre. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Havre roof with drainage challenges or heavy weather exposure.
Most residential attic insulation projects in Havre are completed in a single day. Our crews prep the space, apply the spray foam to the desired thickness, and clean up within 6 to 8 hours. The foam cures within minutes, and you can feel the difference in your home comfort levels the same day.
Real reviews from property owners we have served across the country.
"Our crawl space was damp, musty, and completely uninsulated. They sealed all the rim joists and band boards with closed-cell foam. The floors above are warmer and the moisture problem is gone. Should have done this years ago."
"Our 18-year-old roof was showing its age but still structurally sound. Lapolla Industries recommended restoration over replacement and it was the right call. New coating, sealed seams, and a 15-year warranty. Smart investment."
"We manage a 40,000 square foot retail center and the roof was near end of life. Instead of tearing it off they restored it with a spray foam and coating system. Saved us over sixty percent versus replacement and added twenty years of life."
We also provide spray foam roofing and insulation services in these neighboring communities.